|
2124
Ground Resistance Tester
|
|
- Earth
resistance measurement 2-pole, 3-pole, 4-pole earth resistance
measurements.
-
Selective earth resistance measurement with clamp (no influence
from parallel earth;no opening of rusty junctions is needed).
-
Two clamp earth measurement for quick testing in urban areas
(no opening of rusty junctions).
-
Specific earth resistance (r) measurement.
- True
RMS current measurement for determining problems on earth
systems and conductors.
- Outstanding
features even in presence of mains interference and high
probe resistance.
- Warnings
indication for out of limits results and incorrect test
conditions.
- 1000
memory locations and PC Software for print-out of measurement
protocol.
- Socket
for external battery charger. Auto power-off.
|
|
|
|
Staandard Set:
- Instrument
- Test lead 4.5m, (Black)
- Test lead 4.5m, (Green)
- Test lead 15m, (Red)
- Test lead 20m, (Blue)
- Earth test rod, 4pcs
- Manual
|
|
|
| Specification:
|
|
Earth Resistance
(four probes method)
|
0
to 19.99 kOhm, 0.01 resolution, 2% accuracy, <40V 125Hz test
voltage, short circuit protection, noise rejection. |
| Earth
Resistance (with two optional clamps) |
0
to 19.99 Ohms at 10% accuracy, 20 to 100 Ohms at 20%. |
| Specific
Earth Resistivity |
0
to 1999 kOhm/m (or kOhm/ft), 1 to 30m distance between test
rods. |
| True
RMS Current (with optional clamp) |
0
to 200A, 0.1A resolution, 5% accuracy |
| Protection: |
Double
insulation, CAT III/300V, CAT II/600V |
| Dimensions,
weight: |
90
x 160 x 180 mm, 1.2 kg |
| Accessories
included with the tester: |
Four
test rods, two 4.5m leads (green and black), two 15m leads (red
and blue), manual, batteries. |
| Optional
accessories: |
50m
leads, clamp-on sensors, Windows software |
For your price and delivery inquires, application
details comments, and general feedback, please select  Feedback Mailbox
|
