The Model 507 with independent outputs, provides
digitally controlled current pulses with currents from 0 to
25 Amps and pulsewidths from 0.1 to 100 msec. The Model 507
incorporates unique design features that make it the ideal
signal generator for airbag squib and initiator testing, fuse
testing and laser trigger applications.
| Spefication |
|
|
| Delays |
Outputs |
| Channels |
2 / 4 / 8 independent outputs,
with digitally controlled current delay and pulse width
|
Impedance |
1.405 ohms |
| Delay |
0 to 99.9999998 sec |
Slew Rate |
2.5A/µs |
| Pulsewidth |
0.1 ms to 100 ms |
Overshoot |
< 100mA + 10% of pulse amplitude
|
| Resolution |
200 ns |
Amplitude |
0-25A with 50mA resolution
|
| Accuracy |
100 ns + .0001 x delay |
Bank Capacitance |
24000 µF |
| Timebase |
5 MHz, 25 PPM crystal oscillator |
Peak Current
|
25A per channel |
| RMS Jitter |
100 ns max |
DC Current
Limit |
100 mA (each channel) |
| Trig Delay |
Ext Trig to T0 < 10 µs |
|
|
| External
Trigger/Delays |
Internal
Rate Generator |
| Rate |
Dc to 1/(75 µs + largest delay
+ period) |
Modes |
Single shot, external trigger.
|
| Threshold |
3 VDc (3 mA into optoisolator)
|
RMS Jitter |
100 ns |
| Trigger
Slope |
Rising or falling
time |
|
|
| Impedance |
1000 ohms |
|
|
| Impedance
|
1000 ohm |
|
|
| Computer
Interface |
General |
| RS232 |
9600 Baud. All instrument functions
and settings may be controlled over the interface bus |
Storage |
Storage for 12 complete configurations,
may be stored and recalled from the front panel or the
computer interface. |
| Threshold |
0.2 to 15VDC |
Dimensions |
7.5" x 9.0" x 4.0" |
| Maximum Input
Voltage |
60V Peak |
Weight |
10 lbs |
| Resolution |
10mV |
Power |
20 watts @ 120 or 220V AC |
| Polarity
|
Active High/Active Low |
|
|
| Function
|
Pulse Inhibit or Output Inhibit |
|
|
| Channel Behavior |
Global w/ Individual Channel
Enables |
|
|
| Internal
Rate Generator |
|
|
| Rate |
0.0002 Hz to 20.000 Mhz (40
MHZ optionl) |
|
|
| EEE 488 STD |
Optional |
|
|
| GPIB |
Optional |
|
|
| |
|
