|
|
|
SuperPro IS01 ISP Programmer
Fastest ISP programmer w/ ARM9
|
Use this powerful
device search database to identify suitable programmers and
adapters for your target devices.
|
- High speed ARM9 CPU based hardware engine. Programming
speed adjustable for complicated application environments
brought by user target board, length of ISP cable etc…
- Supports ISP programming of devices with I2C, SPI, CAN,
UART, BDM, MW, JTAG, or any other serial port.
- Comes with ATE interface.
- Supports Linux O/S.
- Two operation modes: Stand-alone and PC-Host mode.
- DLL, API or Virtual Com communication command set available
for third party application.
- USB 2.0 interface to PC for data communication and control.
- Over-current and ESD protection to protect your equipment.
- Lightest ever: Mechanical size: 137mm(L)x87mm(W)x47mm(H).
|
|
|
|
Device
List |
|
Specification
|
| Hardware Specifications |
- ISP cable integrates I2C, SPI, UART, BDM, MON, MW, JTAG,
CAN, ICC, RS232 interfaces. VDD (0-5.5V /0.5A) and Vpp (0-15V
/ 0.2A) lines provided to power the target board and the
target devices.
- Cable driver circuit supports target devices of voltage
level 1.5-5V and it is ESD protected.
- USB 2.0 (high speed) interface for PC hosted mode and
management of project files on SD card.
- Built-in 20 Characters x 4 lines LCD and a 6-key keypad
it for stand-alone operation. In stand-alone mode project
files are stored on the SD card (up to 32GB). The number
of the project files is limited only by the capacity of
the SD card.
- ATE interface is built for easy external hardware control.
6 lines SEL0-SEL5 are for project selection (maximum 64
files); 2 command lines START and STOP; 3 STATUS lines PASS,
FAIL and BUSY. All signals are optical-isolated.
- A universal AC adapter of DC12V/2A is included for power
supply.
|
| Software Specifications |
- Supports almost all devices with ISP interface.
- Supports Jam & Staple files from ACTEL & ALTERA; and Direct
C files from ACTEL.
- Programming speed is selectable (High, Normal and Low)
for complicated applications such as different cable lengths,
different target load characters.
- Provides dynamic buffer function. Application examples
include device S/N, MAC address, frequency or transducer
calibration etc.
- Supported file format on SD Card: FAT16, FAT32.
- Available functions for IP protection: Project security,
SD security, batch control, administration management etc.
- Provides API and DLL for easy integration of customers’
systems such as ICT and ATE.
- SuperPro IS01 software allows multiple units working concurrently
through USB HUB.
|
| Items Included |
SuperPro IS01 ISP Programmer,
AC adapter, ISP Cable, Software CD, USB Cable, User’s Manual
|
| E-mail us your question |
|
For further product details
and to see other models and accessories please visit the Xeltek
web page.
|
|
